| Item NO |
AZURE-P266F |
Output average power(mW) |
120 |
| Wavelength(nm) |
2661 |
M2 factor |
<1.5 |
| Operating mode |
Frequency conversion of Q-switched pulsed laser |
Beam parameters |
Elliptical(4:1),Beam spot2mm |
| Single pulse energy(J) |
0.14 |
Polarization ratio |
>100:1 |
| Pulse duration(ns) |
10 |
Beam height from base plate(mm) |
45 |
| Peak power(W) |
1500 |
Operating temperature() |
1035 |
| Warm-up time (minutes) |
<10 |
Power supply(90-264VAC) |
AZURE-PSF-FDA |
| Ave power stability(over 4 hours) |
<5%,<10% |
Expected lifetime(hours) |
10000 |
| Transverse mode |
Near TEM00 |
Warranty period |
1 year |
| Rep.rate(kHz) |
Controllable |
Specified One rep.rate,such as 1k,2k,3k,up to 5kHz,with stable
laser pulses emitting (stable pulse energy,peak,duration and period). |
| Different reo.rate in the range of 1Hz-5kHz can be obtained by input an extemal TTL signal. |
| Uncontrollable |
Undefined rep.rate among 5k-20kHz and unstabh\le laser pulse emitting.Suitable for the applications only needing high peak power pulses. |
| Average power(mW) |
Average power (mW)=Single pulse energy(J)* Rep.rate(kHz) |
| Remarks |
Note:because of the Walk-off effect of Nonlinear crystals,the beam quality of UV Laser is not so good as that of 1064/532nm Laser |
Products >>DPSS Laser module >>UV Laser BACK 
